1.平台总线模型简介

1.什么是平台总线模型

平台总线模型也叫platform总线模型。是linux内核虚拟出来的一条总线，不是真实的导线。
平台总线模型就是把原来的驱动C文件给分成了俩个C文件，一个是device.c,一个是driver.c
把稳定不变的放在driver,c里面，需要变的就放在device,c里。

2.平台总线优缺点

（1）.可以提高代码的重用性
（2）.减少重复性代码
设备 总线（连接设备和驱动） 驱动
device.c driver.c

3.怎么编写以平台总线模型设计的驱动？

一个是device.c ，一个是driver.c，然后分别注册device.c和driver.c。
平台总线就是以名字来匹配，实际上就是字符串比较。

2.平台总线注册一个device

device.c里面写的是硬件资源，这里的硬件资源是指寄存器的地址，中断号，时钟等硬件资源。
device,c代码

#include <linux/init.h>  
#include <linux/module.h> 
#include <linux/platform_device.h>
#include <linux/ioport.h>

void led_release(struct device *dev)
{
	printk("led_release \n");
}

struct resource led_res[] = {
	[0] = {
		.start = 0xfe200000,
		.end = 0xfe200003,
		.flags = IORESOURCE_MEM,
		.name = "GPIO1_IO4DIR",
	},
	[1] = {
		.start = 0xfe20001c,
		.end = 0xfe20001f,
		.flags = IORESOURCE_MEM,
		.name = "GPIO1_IO4H"
	},
	[2] = {
		.start = 0xfe200028,
		.end = 0xfe20002b,
		.flags = IORESOURCE_MEM,
		.name = "GPIO1_IO4L"
	},
};

struct platform_device led_device = {
	.name = "led_test",
	.id = -1,
	.resource = led_res,
	.num_resources = ARRAY_SIZE(led_res),
	.dev={
		.release = led_release,
	},

};

static int device_init(void)
{
	platform_device_register(&led_device);
	printk("platform_device_register ok \n");
	
	return 0;
}

static void device_exit(void)
{
	platform_device_unregister(&led_device);

	printk("goodbye! \n");
}

module_init(device_init);
module_exit(device_exit);

MODULE_LICENSE("GPL");

3.平台总线注册driver

driver.c代码

#include <linux/init.h>  
#include <linux/module.h> 
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/miscdevice.h> //注册杂项设备头文件
#include <linux/uaccess.h>
#include <linux/fs.h>
#include <linux/io.h>

unsigned int *vir_gpio4_dr=NULL;
unsigned int *vir_gpio4_h=NULL;
unsigned int *vir_gpio4_l=NULL;

struct resource *gpio4_dir;
struct resource *gpio4_h;
struct resource *gpio4_l;

struct resource *leddir_mem_test;
struct resource *ledh_mem_test;
struct resource *ledl_mem_test;

ssize_t misc_write(struct file *file, const char __user *ubuf, size_t size, loff_t *loff_t)
{
	char kbuf[64] = {0};
	if ( copy_from_user( kbuf, ubuf, size) != 0)
	{
		printk( "copy_from_user error\n ");
		return -1;
	}
	printk( "kbuf is %s\n ", kbuf);
	*vir_gpio4_dr |= (001<<(3*4));
	if( kbuf[0] == 1)
	{
		
		*vir_gpio4_h |=(1<<4);
	}
	else if( kbuf[0]==0)
	{
		*vir_gpio4_l |=(1<<4);
	}
	return 0;
}

int misc_release( struct inode *inode, struct file *file)
{
	printk( "hello misc_relaease bye bye \n ");
	return 0;
}

int misc_open( struct inode *inode, struct file *file)
{
	printk( "hello misc_open\n ");
	return 0;
}
//文件操作集
struct file_operations misc_fops = {
		.owner = THIS_MODULE, 
		.open = misc_open,
		.release = misc_release,
		.write = misc_write,
		};
//miscdevice 结构体
struct miscdevice misc_dev = {
	.minor = MISC_DYNAMIC_MINOR, 
	.name = "hello_misc",
	.fops = &misc_fops,
};


int led_probe( struct platform_device *pdev)
{
	
	int ret;

	printk( "led_probe\n");
	ret = misc_register( &misc_dev); //注册杂项设备
	if (ret < 0)
	{
		printk( "misc registe is error \n");
	}
	printk( "misc registe is succeed \n");

	gpio4_dir = platform_get_resource( pdev, IORESOURCE_MEM, 0);
	gpio4_h   = platform_get_resource( pdev, IORESOURCE_MEM, 1);
	gpio4_l   = platform_get_resource( pdev, IORESOURCE_MEM, 2);

	vir_gpio4_dr = ioremap( gpio4_dir->start,4);
	if( vir_gpio4_dr== NULL )
	{
		printk( "gpio4dr ioremap error\n");
		return EBUSY;
	}
	
	vir_gpio4_h = ioremap( gpio4_h->start,4);
	if( vir_gpio4_h== NULL)
	{
		printk( "gpio4h ioremap error\n");
		return EBUSY;
	}

	vir_gpio4_l = ioremap( gpio4_l->start,4);
	if( vir_gpio4_l == NULL)
	{
		printk( "gpio4l ioremap error\n");
		return EBUSY;
	}
	printk( "gpio ioremap success\n");

	return 0;
#if 0
	leddir_mem_test = request_mem_region( gpio4_dir->start, gpio4_dir->end - gpio4_dir->start +1, "led_dir");
	if( leddir_mem_test == NULL){
		printk( "platform_get_resource iserror \n");
		goto errdir_region;
	}
	
	ledh_mem_test = request_mem_region( gpio4_dir->start, gpio4_dir->end - gpio4_dir->start +1, "led_dir");
	if( ledh_mem_test == NULL){
		printk( "platform_get_resource iserror \n");
		goto errh_region;	
	}
	
	ledl_mem_test = request_mem_region( gpio4_dir->start, gpio4_dir->end - gpio4_dir->start +1, "led_dir");
	if( ledl_mem_test == NULL){
		printk( "platform_get_resource iserror \n");
		goto errl_region;
	}
	return 0;

errdir_region:
	release_mem_region( gpio4_dir->start, gpio4_dir->end - gpio4_dir->start +1);

	return -EBUSY;
errh_region:
	release_mem_region( gpio4_h->start, gpio4_h->end - gpio4_h->start +1);

	return -EBUSY;	
errl_region:
	release_mem_region(gpio4_l->start, gpio4_l->end - gpio4_l->start +1);

	return -EBUSY;
#endif
}

int led_remove( struct platform_device *pdev)
{
	printk("led_remove\n");
	return 0;
}
struct platform_driver led_driver ={
	.probe = led_probe,
	.remove = led_remove,
	.driver = {
		.owner = THIS_MODULE,
		.name = "led_test"
	},
};

static int led_driver_init( void)
{
	int ret =0;
	ret = platform_driver_register( &led_driver);
	if( ret<0)
	{
		printk( "platform_driver_register error \n");
	}
	printk( "platform_driver_register ok \n");
	return 0;
}

static void led_driver_exit(void)
{
	misc_deregister( &misc_dev); //卸载杂项设备
	printk( "misc gooodbye! \n");
	iounmap( vir_gpio4_dr);
	iounmap( vir_gpio4_h);
	iounmap( vir_gpio4_l);

	// platform 驱动卸载
	platform_driver_unregister( &led_driver);
	printk( "goodbye! \n");
}

module_init( led_driver_init);
module_exit( led_driver_exit);

MODULE_LICENSE( "GPL");

4.Makefile

在使用我写的Makefile的时候记得改下KDIR，和ARCH,

 obj-m +=device.o
 obj-m +=driver.o
 KDIR:=/home/kun/build_new/linux_kernel
 PWD?=$(shell pwd)
 all:
 	make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C $(KDIR) M=$(PWD) modules
 clean:
 	rm *.mod.c *.order *.ko *.o *.mod *.symvers

5.app

编译指令arm-linux-gnueabihf-gcc app.c -o app -static

#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
int main(int argc,char *argv[])
{
	int fd;
	fd = open("/dev/hello_misc",O_RDWR);//打开设备节点
	if(fd < 0)
	{
		perror("open error \n");
		return fd;
	}
	buf[0]=atoi(argv[1]);
	write(fd,buf,sizeof(buf)); //向内核层写数据
	close(fd);
	return 0;
}

5.编译运行

1.执行make,然后将生成的driver.ko、device.ko以及app可执行文件移到树莓派

2.先sudo dmesg -C 将内核杂志清楚

3.sudo insmod driver.ko

4.sudo insmod device.ko

5. dmesg可以查看打印信息

6.sudo ./app 1

7. sudo ./app 0

6 总结

platform总线给我的感觉就是把硬件的信息放在一个文件，让后另一个文件去获取该文件的硬件信息，感觉就相当于一个.c文件，一个.h文件，.c文件去写实现功能，.h去定义需要的文件，然后app可执行文件相当于main函数，去调用。（本人小白，刚学习驱动开发，个人愚见，如果不对的话，麻烦各位大佬提出，不胜感激）