配置zabbix监控nginx状态，监控华为路由器

配置zabbix监控nginx状态，监控华为路由器

1.安装并开启nginx

[root@localhost ~]# yum install nginx -y
[root@localhost ~]# systemctl start nginx

2、在zabbix配置文件中自定义监控项key（UserParameter）key为nginx.status

[root@localhost ~]# vim /etc/zabbix/zabbix_agentd.d/nginx_status.conf
UserParameter=nginx.status,systemctl status nginx | awk NR==3’{print $3}‘| awk -F ‘(’ ‘{print $2}’| awk -F’)’ ‘{print $1}’

3、重启zabbix-agent

[root@localhost ~]# systemctl restart zabbix-agent

4.安装zabbix-get

[root@localhost ~]# yum -y install zabbix-get

5.测试自定义的监控项nginx.status

[root@localhost ~]# zabbix_get -s 192.168.59.128 -k “nginx.status”
当nginx运行时显示running，不运行时显示dead

6.web端创建监控项和触发器
添加监控项

添加触发器

触发器测试：
1、关闭zabbix-agent端的nginx
2、查看报警情况

二、配置zabbix监控华为路由器

1.搭建拓扑图

配置华为云

sys [Huawei]int g0/0/0
[Huawei-GigabitEthernet0/0/0]ip address 192.168.59.1 24
[Huawei]snmp-agent
[Huawei]snmp-agent community read huawei
[Huawei]snmp-agent sys-info version all
[Huawei]snmp-agent target-host trap-hostname zabbix address 192.168.5.11 udp-port 161 trap-paramsname huawei
[Huawei]snmp-agent trap enable Info: All switches of SNMP trap/notification will be open. Continue? [Y/N]:y

查看 zabbix-server、HUAWEI-route 连通性

2.zabbix-server 监控
添加主机群组



配置主机宏

创建图形

监控结果